ICO RALLY, ESCO Components
Toll Free: 800-856-9909

your name:

your e-mail:

your question:

ProFIT Heat Shrinkable Tubing

The ICO RALLY brand of heat shrinkable products is made from thermoplastic material such as polyolefins, fluoropolymers, PVC, neoprene, and silicone elastomers. The tubing shrinks in diameter when heated to provide insulation, abrasion protection, strain relief, identification, and aesthetic appeal. Available in a variety of wall thicknesses, colors, and sizes, ICO RALLY is sure to have the exact tubing required to meet your specific application. The PRODUCT COMPARISON GUIDE found below is an excellent source for determing the type of heat shrinkable tubing you need, based on your requirements. Many of these products meet the SAE-AMS-DTL-23053 military standard for heat shrinkable tubing.

Heat Shrinkable TubingHeat Shrinkable Tubing Products:

download Heat Shrinkable Tubing catalog

 

Heat Shrinkable Polyolefins

Heat Shrinkable PolyolefinsConsists of our most popular lines of heat shrinkable tubing used for insulating, jacketing, bundling, and identification. These products are available in a variety of colors and shrink ratios, and meet a wide range of UL and mil-spec standards.

  • H4X - General Pupose Polyolefin, Flexible, Thin-Wall, 4:1
  • HIX - General Pupose Polyolefin, Flexible, Thin-Wall, 2:1
  • HIX3X - General Pupose Polyolefin, Flexible, Thin-Wall, 3:1
  • HIX-G/Y - General Pupose Polyolefin, Flexible, Thin-Wall, Green-Yellow Striped, 2:1
  • HIX-VW1 - General Pupose Polyolefin, VW-1 Marked, 2:1
  • HLT - General Pupose Polyolefin, Very Flexible, Thin-Wall, 2:1
  • HLT3X - General Pupose Polyolefin, Very Flexible, Thin-Wall, 3:1
  • HRX - Polyolefin, Semi-Rigid, Thin-Wall, 2:1
  • HW3X - Polyolefin, Semi-Rigid, Heavy-Wall, Adhesive-Lined, 3:1
  • HW3X-FR - Polyolefin, Semi-Rigid, Heavy-Wall, Adhesive-Lined, Flame-Retardant, 3:1
  • HWP - Polyolefin, Flexible, Medium-Wall, Adhesive-Lined, 3:1
  • HAT - General Pupose Polyolefin, Flexible, Thin-Wall, Adhesive-Lined, 2:1
  • HCATV - Polyolefin, Semi-Rigid, Heavy-Wall, Adhesive-Lined, 3:1
  • HES1000 - Polyolefin, Flexible, Adhesive-Lined Polyolefin, 4:1
  • HES2000 - Polyolefin, Flexible, Adhesive-Lined Polyolefin, 4:1
  • HIM - Polyolefin, Semi-Rigid, Heavy-Wall, Meltable Inner Wall, Variable Shrink Ratio
  • HML - Polyolefin, Flexible, Medium-Wall, Adhesive-Lined, 3:1
  • HML4X - Polyolefin, Flexible, Medium-Wall, Adhesive-Lined, 4:1

Heat Shrinkable Fluoropolymers

Heat Shrinkable FluoropolymersThese materials exhibit a high resistance to solvents, acids, and bases, and have a higher temperature range than any other tubing available. Typically these products are used in high thermal and harsh environmental applications, or where a low coefficient of friction is required.

  • HFEP1.3 - FEP, Flexible, Thin-Wall, 1.3:1
  • HFEP1.6 - FEP, Flexible, Thin-Wall, 1.6:1
  • HFX - Teflon, Semi-Rigid, Thin-Wall, 4:1
  • HKFX - Fluoropolymer, Semi-Rigid, Thin-Wall, 2:1
  • HKX - Kynar, Semi-Rigid, Thin-Wall, 2:1
  • HSX - Teflon, Semi-Rigid, Medium-Wall, 1.5:1
  • HTX - Teflon, Flexible, Thin-Wall, 1.5:1
  • HVFX - Fluoropolymer, Very Flexible, Thin-Wall, 2:1
  • HTIM - Fluoropolymer, Semi-Rigid, Heavy-Wall, Meltable Inner Wall, Variable Shrink Ratio

Heat Shrinkable Vinyls

Heat Shrinkable VinylsThe vinyl line of tubing offers the lowest shrink temperature of all ProFIT tubing, and is especially applicable where high shrinking temperatures could damage enclosed or adjacent components. These are available in a wide range of colors, and are more cost-effective to manufacture.

  • HCX - PVC, Flexible, Thin-Wall, Cross-Linked, 2:1
  • HLF - LAYFLAT PVC, Semi-Rigid, Very Thin-Wall, 2:1
  • HVX - PVC, Flexible, Thin-Wall, 2:1

Heat Shrinkable ElastomersHeat Shrinkable Elastomers

These elastomeric materials offer outstanding performance in both low and high continuous temperature environments. The high tubing strength makes them especially suitable for applications requiring high abrasion and impact resistance.

  • HNTFR - Neoprene Elastomer, Flexible, Medium-Wall, 1.75:1
  • HVT - Viton Fluoroelastomer, Flexible, Medium-Wall, 2:1

Medical Grade Heat Shrinkable ProductsMedical Grade Heat Shrinkable Products

Specifically engineered USP Class VI materials designed for electrical insulation and strain relief of components that are exposed to high temperatures during use or sterilization.

  • HSMG-A - Medical Grade Fluoropolymer, Semi-Rigid, Thin-Wall, 2:1
  • HSMG-C - Medical Grade Fluoropolymer, Flexible, Thin-Wall, 2:1
  • HSMG-E - Medical Grade Polyolefin, Flexible, Thin-Wall, 2:1

Special Application Products

NST
  • HSF - Heat Shrinkable Fabric, Polyolefin/Polyester, Flexible, Thin-Wall, 2:1
  • HSF3X - Heat Shrinkable Fabric, Polyolefin/Polyester, Flexible, Thin-Wall, 3:1
  • NST - NO-HEAT™ Shrinkable Tubing, Flexible, Heavy-Wall, Variable Shrink Ratio
  • HSRT - Heat Shrinkable Repair Tubing, Polyolefin, Flexible, Thin-Wall, Variable Shrink Ratio
  • HSLD - Polyolefin, Flexible, Thin-Wall, EMI Shielding, 2:1

Mini Heat Gun II Heat Gun KitMini Heat Gun II Heat Gun Kit

The MINI HEAT GUN II is ICO RALLY's most compact and lightweight UL Recognized heat gun. Powered by standard 110V AC power, it boasts a nozzle temperature of 610°F. When not in use, you can hang the MINI HEAT GUN II out of your way with its convenient workbench storage loop.

Auto-Heat II Conveyor Oven

Auto-Heat II Conveyor Oven

ICO RALLY's AUTO HEAT II conveyer ovens offer an economical heat-process system designed and engineered to address the requirements of today's industry. These heat ovens provide a particular value
in the laboratory, prototype, or low-to-medium volume production operations.

 

download Heat Shrinkable Tubing catalog

Website Marketing Success by Top Floor Technologies